Maxwell Recruitment & Training

Low Volt Rescue + CPR
2026-09-02 07:30 - 12:00, 2026-08-27 07:30 - 12:00, 2026-08-24 07:30 - 12:00, 2026-08-21 07:30 - 12:00 (Australia/Sydney) | NEWCASTLE, NEWCASTLE, Australia
Low Voltage Rescue CPR
LVRCPR3

- UETDRMP018 Perform rescue from a live low voltage panel
- HLTAID009 Provide cardiopulmonary resuscitation
(Note: HLTAID009 Provide cardiopulmonary resuscitation is a pre-requisite to UETDRMP018 Provide rescue from a live low voltage panel)
Upcoming Training
There are currently no openings available for this course.

Low Voltage Rescue (LVR) incl. CPR
HLTAID009 Provide Cardiopulmonary Resuscitation and UETDRMP018 Perform rescue from a live low voltage panel (LVR) are nationally recognised units of competency that provide you with the critical knowledge and hands-on skills to respond to an emergency involving a live low-voltage (LV) electrical panel. You will learn how to identify life-threatening situations quickly and use CPR techniques to sustain life until professional medical help arrives.

Accredited Units of Competency
On successful completion, you will receive a Statement of Attainment for:

UETDRMP018 Perform rescue from a live low voltage panel
HLTAID009 Provide Cardiopulmonary Resuscitation

Prerequisites

HLTAID009 Provide cardiopulmonary resuscitation is a prerequisite for UETDRMP018 Perform rescue from a live low voltage panel and is included in this course
To enrol in LVR only, you must submit current evidence of HLTAID009 Provide cardiopulmonary resuscitation at enrolment for a Credit Transfer
Note: You must have the physical ability to perform at least two minutes of uninterrupted CPR on a manikin placed on the floor

Book Now

What You’ll Learn
Upon successful completion of this course, you will be able to:

LVR

Understand the specific hazards of live LV equipment in electrical environments
Conduct risk assessments and apply controls
Inspect and use rescue kit and PPE correctly and safely
Identify voltage, isolate power, maintain safe distances, and follow safety protocols
Conduct a live LV panel rescue using approved methods safely
Secure the area after the rescue and complete accurate documentation?

CPR

Recognise and respond to an unresponsive casualty
Perform CPR on adults, children, and infants following ARC guidelines
Use an AED to deliver a shock safely and effectively
Maintain continuous CPR while working with others in an emergency situation
Communicate effectively with emergency services and bystanders
Complete incident reports and workplace documentation after an emergency
Understand the importance of ongoing refresher training to keep your skills current

Who Is This Course For?
This course is ideal if you:

Work with or near electrical equipment
Are a safety observer for electrical work
Need to meet workplace or licensing requirements for LVR and CPR training
Want the skills to respond to emergencies in the workplace, at home, or in the community

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes practical activities and assessments
Learn through interactive presentations, trainer demonstrations, and realistic hands-on practical activities

Practical Activities

Performing CPR on adult, child, and infant manikins
Operating an AED
Managing an unresponsive casualty, including placing them in the recovery position
Checking and using PPE and LV rescue equipment
Identifying voltage
Locating and isolating electrical supply points
Conducting a Dynamic Risk Assessment (DRA)
Practising rescues with a mannequin from a simulated LV panel
Communicating with others and emergency services
Securing the incident site after the rescue
Completing workplace documentation such as risk assessments and incident reports

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as a Take 5 and Incident Report Form
Practical demonstration of a simulated rescue, CPR and use of an AED

Book Now

Entry Requirements
To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Complete basic written reports and workplace documentation such as a Take 5 and Incident Report
Follow verbal and written instructions from the trainer
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Be physically able to move quickly and safely to perform a rescue.
Use rescue equipment without assistance
Be physically able to perform CPR on the floor for at least two minutes
Be able to kneel, bend, and perform compressions and breaths effectively

Got Any Questions?
If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Licence to Operate a Boom-Type Elevating Work Platform (Over 11 Metres)
2026-09-01 07:30 - 15:30, 2026-08-31 07:30 - 15:30
Licence to Operate a Boom-Type Elevating Work Platform (Over 11 Metres)
EWP2

Licence to Operate a Boom-Type Elevating Work Platform (11 metres or more)
Upcoming Training
There are currently no openings available for this course.

Licence to Operate a Boom-Type Elevating Work Platform (11 metres or more)
Operating an EWP over 11 metres is high-risk work that requires the right skills, knowledge, and licence to perform safely. This nationally recognised course gives you the practical experience and confidence to safely operate boom-type elevating work platforms in real workplace environments.

Delivered over three days at Maxwell Training, this course combines hands-on training, real-world scenarios, and SafeWork NSW-aligned assessment to prepare you for your High-Risk Work Licence. You’ll learn how to identify hazards, interpret load charts, manage risks when working at height, and operate safely — helping you protect yourself, your team, and your workplace.

Accredited Unit of Competency
On successful completion, you will receive a Statement of Attainment for:

TLILIC0005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more)

Prerequisites

Nil

Licencing

This course leads to a SafeWork NSW High Risk Work Licence (WP class)
You must be 18 years or older and provide valid ID to be assessed
Formal assessment is conducted by a SafeWork NSW accredited assessor
A fee will apply to obtain your licence from SafeWork NSW upon successful completion

Book Now

What You’ll Learn
Upon successful completion of this course, you will be able to:

Plan and prepare for EWP operations safely
Conduct pre-start and post-start inspections, including logbooks and harness checks
Identify hazards and apply effective risk controls (Take 5, exclusion zones, traffic management)
Interpret EWP load charts, working envelopes and rated capacity (SWL)
Calculate total platform loads (people, tools and equipment)
Safely set up and operate an EWP at height
Work safely around powerlines, structures, and other workers
Use fall protection equipment, including harnesses and anchor points
Communicate effectively using hand signals, radios and workplace procedures
Respond to emergencies, including controlled descent and rescue procedures
Follow WHS legislation, Codes of Practice, and workplace procedures

Who Is This Course For
This course is ideal for:

Workers required to operate boom-type EWPs over 11 metres
Tradespeople, construction, maintenance and industrial workers
Employers wanting to upskill staff for working at heights safely
Anyone needing a WP High Risk Work Licence

Book Now

How the Training Works
Training Delivery

Training is delivered in person by a qualified trainer at one of Maxwell Training’s facilities, or at your site pending a suitability inspection
Maximum class size: 8 participants
Duration: 3 days (7.5 hours per day)
Includes classroom learning, practical workshop activities and real-world scenarios
Final assessment (Day 3) is conducted by a SafeWork NSW accredited HRW assessor

Practical Activities
You will take part in realistic, hands-on activities including:

Completing EWP pre-start and post-start inspections
Conducting harness inspections and safety checks
Interpreting load charts and working envelopes
Calculating Safe Working Load (SWL) for tasks
Completing Take 5 risk assessments
Setting up exclusion zones and traffic management controls
Operating an EWP at height
Managing hazards such as wind, ground conditions, and powerlines
Practising emergency procedures including controlled descent

Assessment
Your competency will be assessed through:

Knowledge assessment (multiple choice and short answer)
Portfolio of Evidence
Practical observation assessments
SafeWork NSW HRW assessment (theory practical)

Book Now

Entry Requirements
To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Must be 18 years or older
Proof of identity must be supplied and verified on the day of training and assessment
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Licencing Process (SafeWork NSW)
To complete your licence assessment, you must:

APPLY ONLINE for an Assessment Enrolment Number (AEN)
Complete your digital ID check (2 FORMS OF ID REQUIRED)
Receive your AEN via email
Provide your AEN to your assessor before your assessment
Your results will be emailed to you after completion
A $92 licence fee will be required by SafeWork upon successful completion of the HRW assessment

Language, Literacy, Numeracy & Digital (LLND)
You will need basic skills to:

Read and complete knowledge questions (basic Year 10 level literacy)
Read and interpret safety procedures, signage and load charts
Complete logbooks, Take 5 forms and assessments
Perform basic calculations (platform load and SWL)
Follow verbal and written instructions from the trainer
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements
To safely participate, you must be able to:

Climb on and off the EWP using three points of contact
Work safely at height for extended periods
Wear and use a safety harness and PPE
Operate controls while maintaining balance and awareness
Respond to changing site conditions and hazards
Maintain alertness and coordination during operation

Got Any Questions?
If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

EWP Training (Under 11m, Over 11m & Scissor Lift)
2026-09-01 07:30 - 15:30, 2026-08-31 07:30 - 15:30
EWP Training (Under 11m, Over 11m & Scissor Lift)
EWP3

EWP Training (Under 11m, Over 11m & Scissor Lift)
Upcoming Training
There are currently no openings available for this course.

Elevating Work Platform Training (Under 11m, Over 11m & Scissor Lift)
Operate with confidence across a variety of EWP types. This combined course gives you the skills, knowledge, and certification to safely operate boom-type elevating work platforms (over 11 metres), EWPs under 11 metres, and scissor lifts in real workplace environments.

Delivered in a structured, hands-on format, this course combines practical training, real-world scenarios, and SafeWork NSW-aligned assessment — preparing you for both workplace competency and your High Risk Work Licence (WP class).

Unlike standalone EWP courses, this program delivers two nationally recognised units of competency and the pathway to your HRWL — making it ideal for workers and employers looking for complete capability across all EWP types.

Accredited Unit of Competency
On successful completion, you will receive a Statement of Attainment for:

TLILIC0005 Licence to operate a boom-type elevating work platform (boom length 11 metres or more)
RIIHAN301E Operate elevating work platform

Prerequisites

Nil

Licencing

This course leads to a SafeWork NSW High Risk Work Licence (WP class)
You must be 18 years or older and provide valid ID to be assessed
Formal assessment is conducted by a SafeWork NSW accredited assessor
A fee will apply to obtain your licence from SafeWork NSW upon successful completion

Book Now

What You’ll Learn
Upon successful completion of this course, you will be able to:

Plan and prepare for EWP operations safely
Conduct pre-start and post-start inspections, including logbooks and harness checks
Identify hazards and apply effective risk controls (Take 5, exclusion zones, traffic management)
Interpret EWP load charts, working envelopes and rated capacity (SWL)
Calculate total platform loads (people, tools and equipment)
Safely set up and operate an EWP at height
Work safely around powerlines, structures, and other workers
Use fall protection equipment, including harnesses and anchor points
Communicate effectively using hand signals, radios and workplace procedures
Respond to emergencies, including controlled descent and rescue procedures
Follow WHS legislation, Codes of Practice, and workplace procedures

Who Is This Course For
This course is ideal for:

Workers required to operate multiple types of EWPs across worksites
Tradespeople, construction, maintenance and industrial workers
Employers wanting to fully upskill staff in one program
Workers needing both HRWL licensing and general EWP competency

Book Now

How the Training Works
Training Delivery

Training is delivered in person by a qualified trainer at one of Maxwell Training’s facilities, or at your site pending a suitability inspection
Maximum class size: 8 participants
Duration: 3 days (7.5 hours per day)
Structured as a combined (clustered) program covering both units
Includes classroom learning, practical workshop activities and real-world scenarios
Final assessment (Day 3) is conducted by a SafeWork NSW accredited HRW assessor

Practical Activities
You will take part in realistic, hands-on activities including:

Completing EWP pre-start and post-start inspections
Conducting harness inspections and safety checks
Interpreting load charts and working envelopes
Calculating Safe Working Load (SWL) for tasks
Completing Take 5 risk assessments
Setting up exclusion zones and traffic management controls
Operating:

Boom lifts (over and under 11m)
Scissor lifts

Managing hazards such as wind, ground conditions, powerlines and nearby workers
Practising emergency procedures including controlled descent

Assessment
Your competency will be assessed through:

Knowledge assessment (multiple choice and short answer)
Portfolio of Evidence
Practical observation assessments
SafeWork NSW HRW assessment (theory practical)

Book Now

Entry Requirements
To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Must be 18 years or older
Proof of identity must be supplied and verified on the day of training and assessment
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Licencing Process (SafeWork NSW)
To complete your licence assessment, you must:

APPLY ONLINE for an Assessment Enrolment Number (AEN)
Complete your digital ID check (2 FORMS OF ID REQUIRED)
Receive your AEN via email
Provide your AEN to your assessor before your assessment
Your results will be emailed to you after completion
A $92 licence fee will be required by SafeWork upon successful completion of the HRW assessment

Language, Literacy, Numeracy & Digital (LLND)
You will need basic skills to:

Read and complete knowledge questions (basic Year 10 level literacy)
Read and interpret safety procedures, signage and load charts
Complete logbooks, Take 5 forms and assessments
Perform basic calculations (platform load and SWL)
Follow verbal and written instructions from the trainer
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements
To safely participate, you must be able to:

Climb on and off the EWP using three points of contact
Work safely at height for extended periods
Wear and use a safety harness and PPE
Operate controls while maintaining balance and awareness
Respond to changing site conditions and hazards
Maintain alertness and coordination during operation

Got Any Questions?
If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Confined Space Rescue (Refresher)
2026-09-01 07:30 - 15:30
Confined Space Rescue (Refresher)
CSR-R

Upcoming Training
There are currently no openings available for this course.

Confined Space Rescue Training

This one-day refresher course is designed for experienced workers who already hold confined space rescue qualifications and currently perform or support rescue, Standby or emergency response duties in the workplace. The training focuses on refreshing and reassessing the practical and decision-making skills required in real rescue situations. You will revise emergency planning, risk assessment and permit processes, conduct atmospheric testing, and operate breathing apparatus (BA) in simulated hazardous environments. You will also practise casualty recovery using tripods, davit arms and retrieval systems, maintain clear communication under pressure, and follow correct post-incident procedures including debriefing, equipment checks and documentation.

Note: This refresher course is only suitable for experienced people who already work in confined space roles. You must have current confined space rescue qualifications and regularly take part in confined space rescue work or Standby duties in your job.

Accredited Units of Competency

On successful completion, you will receive a Statement of Attainment for the following nationally recognised units:

RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMWHS201 Conduct hazard analysis
MSMPER202 Observe permit work
MSMPER300 Issue work permits*
MSMWHS217 Gas test atmospheres
MSMWHS216 Operate breathing apparatus
PUASAR025 Undertake confined space rescue

Prerequisites

MSMWHS201 Conduct hazard analysis is a prerequisite unit for MSMPER300 Issue work permits and is included in the delivery of this course.
Note: This refresher is only for experienced workers who currently perform confined space entry, Standby and rescue duties. To enrol you must:

Hold current confined space competencies (Statement of Attainment or qualification)
Have completed the relevant units within the last 3 years
Be actively involved in confined space work, Standby and rescue roles in your job

Book Now

What You’ll Refresh & Practice
Upon successful completion of this course, you will be able to:

Review legal responsibilities of rescue personnel and Standby roles
Reassess confined space hazards using permits, rescue plans and risk controls
Issue, observe and close permit-to-work documentation correctly
Test and interpret atmospheric readings using gas detectors and ventilation
Don, operate and monitor Breathing Apparatus (open or closed circuit)
Conduct simulated rescues using harnesses, tripods, winches, davit arms and stretchers
Rescue both conscious and unconscious casualties safely and efficiently
Communicate with rescue teams, entrants and emergency services
Complete post-rescue debrief, permits, incident reports and equipment checks

Who Is This Course For?
This refresher course is suited to workers who currently perform or support confined space rescue or Standby operations, including:

Emergency Response Teams
Confined Space Rescuers / Standby Crew
Water utilities, mining, shutdown, council and industrial maintenance workers
Supervisors or site leaders who need to maintain rescue

Book Now

How Refresher Training Works
Training Delivery

Delivered in intensive refresher format by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
Refresher training is accelerated - learners must provide evidence of confined space Standby and rescue experience and/or prior competency
The total course duration includes practical activities and assessments
Learners will take part in demonstrations, group discussions, and realistic rescue simulations in confined spaces

Practical Activities

Gas testing, permit control and rescue planning
Donning and operating breathing apparatus (BA)
Setting up tripods, davit arms, winches and retrieval systems
Casualty recovery and stretcher extraction and mechanical advantage systems
Simulated emergencies, communications, debrief and equipment recovery
Post-rescue decontamination and incident reporting

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as a Confined Space Entry Permit, rescue plans, risk assessments and gas detector and breathing apparatus inspection checklists, incident report forms
Practical demonstration of selecting and issuing correct permits, monitoring confined space entry and ensuring compliance, gas testing and interpreting results, inspecting and donning breathing apparatus, suspending work or initiating rescue operations

Book Now

Entry Requirements
To fully participate and stay safe during practical activities, you must meet the following requirements:

Refresher Requirements

This refresher is only for experienced workers who currently perform confined space Standby and rescue duties. To enrol, you must:

Hold current confined space competencies (Statement of Attainment or qualification)
Have completed the relevant units within the last 3 years
Be actively involved in confined space work, Standby and rescue roles in your job

General Requirements

Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Read and understand permits, gas test results, safety signs and SWMS
Complete written reports such as permits, handover forms, risk assessments, incident report forms
Communicate clearly with entrants and supervisors
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Ability to remain stationed at an entry point for extended periods
Able to wear PPE such as harness and helmet
Perform manual handling tasks (lifting stretchers, equipment)
Communicate clearly with entrants and supervisors
Working in simulated low-visibility, noisy and stressful rescue scenarios

Got Any Questions?

If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Confined Space Standby (Refresher)
2026-09-01 07:30 - 14:00
Confined Space Standby (Refresher)
CSS-R

Upcoming Training
There are currently no openings available for this course.

Confined Space Standby Refresher Training

This one-day refresher course is designed for workers who have previously completed Confined Space Standby (Safety Observer) training and need to update or maintain current competency. The program revisits critical Standby responsibilities, hazard identification, atmospheric monitoring, permit compliance, communication protocols and emergency response expectations.

Note: This refresher course is only suitable for experienced people who already work in confined space roles. You must have current confined space Standby qualifications and regularly take part in confined space work and Standby duties in your job.

Accredited Units of Competency

On successful completion, you will receive a Statement of Attainment for the following nationally recognised units:

RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMWHS201 Conduct hazard analysis
MSMPER202 Observe permit work
MSMPER300 Issue work permits*
MSMWHS217 Gas test atmospheres

Prerequisites

MSMWHS201 Conduct hazard analysis is a prerequisite unit for MSMPER300 Issue work permits and is included in the delivery of this course
NOTE: This refresher is only for experienced workers who currently perform confined space or Standby duties. To enrol you must:

Hold current confined space competencies (Statement of Attainment or qualification)
Have completed the relevant units within the last 3 years
Be actively involved in confined space work and Standby duties in your job

Book Now

What You’ll Refresh & Practise

Upon successful completion of this course, you will be able to:

Reconfirm legal duties and responsibilities of a Standby Person / Safety Observer
Review confined space entry procedures, permits and risk control documentation
Conduct and interpret atmospheric testing using calibrated gas detectors
Monitor and communicate with confined space entrants effectively and without interruption
Identify changing conditions, hazards, unsafe behaviours or permit breaches — and take appropriate action
Suspend work, initiate emergency response and follow site rescue plans when required
Accurately complete permit close-out, handover and documentation at the end of operation

Who Is This Course For?
This refresher course is suited to workers who currently or regularly perform Standby / Safety Observer duties, including:

Standby Personnel and Permit Observers
Supervisors, Team Leaders and Permit Issuers
Workers in construction, water utilities, councils, mining, shutdowns and maintenance
Employers who require ongoing compliance with WHS legislation and AS/NZS 2865

Book Now

How Refresher Training Works
Training Delivery

Delivered in intensive refresher format by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
Refresher training is accelerated - learners must provide evidence of confined space Standby experience and/or prior competency
The total course duration includes practical activities and assessments
Learners will take part in demonstrations, group discussions, and realistic simulations in confined spaces

Practical Activities

Reviewing and verifying confined space permits, isolations and rescue plans
Monitoring entrants — visual checks, verbal communication and gas monitoring
Conducting hazard analysis and completing permit documentation/close-out
Performing atmospheric testing and interpreting gas detector readings
Responding to unsafe conditions or activating emergency call procedures

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as a Confined Space Entry Permit, risk assessments and gas detector inspection checklists
Practical re-assessment requiring demonstration of selecting and issuing correct permits, monitoring confined space entry and ensuring compliance, gas testing and interpreting results, suspending work or initiating emergency response if conditions change

Book Now

Entry Requirements
To fully participate and stay safe during practical activities, you must meet the following requirements:

Refresher Requirements

This refresher is only for experienced workers who currently perform confined space or Standby duties. To enrol, you must:

Hold current confined space competencies (Statement of Attainment or qualification)
Have completed the relevant units within the last 3 years
Be actively involved in confined space work or Standby roles in your job

General Requirements

Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Read and understand permits, gas test results, safety signs and SWMS
Complete written reports such as permits, handover forms, risk assessments
Communicate clearly with entrants and supervisors
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Ability to remain stationed at an entry point for extended periods
Able to wear PPE such as harness and helmet
Communicate clearly with entrants and supervisors
Capable of initiating emergency procedures and assisting rescue teams

Got Any Questions?

If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Work Safely at Heights Refresher
2026-09-01 07:30 - 12:00, 2026-08-28 07:30 - 12:00, 2026-08-24 07:30 - 12:00
Work Safely at Heights Refresher
WSHREF

Upcoming Training
There are currently no openings available for this course.

Work Safely at Heights (Refresher)

Stay compliant and up to date with industry best practices by refreshing your RIIWHS204E Work safely at heights certification.

This refresher course is designed for workers who already hold the qualification and need to renew their skills and knowledge in accordance with current WHS legislation, codes of practice, and site safety requirements.

You’ll revisit key safety procedures, risk assessment processes, and the correct use of height safety equipment through a blend of hands-on exercises and realistic simulations. The focus is on maintaining your confidence and competence when working at heights — ensuring you and your team return home safely every day.

Accredited Unit of Competency

On successful completion, you will receive a Statement of Attainment for:

RIIWHS204E Work safely at heights

Prerequisites

Nil
Please note: You will be required to submit current evidence (within the last 3 years) of a Working Safely at Heights Statement of Attainment (or its equivalent)

Book Now

What You’ll Learn

Upon successful completion of this course, you will be able to:

Reconfirm correct harness fitting, adjustment, and inspection procedures
Review and apply fall prevention and arrest systems, anchor points, and lifelines
Update knowledge of current WHS legislation, risk assessment, and emergency procedures
Strengthen confidence in identifying and controlling height-related hazards
Reassess and document workplace controls through SWMS, Take 5, and inspection checklists

Who Is This Course For

This course is ideal for anyone working at heights, including:

Individuals with a current or due to expire Work Safely at Heights certificate
Workers required to demonstrate ongoing competency to employers, principal contractors, or regulatory bodies
Employers wanting to keep their teams compliant, confident, and prepared for site audits or safety inspections

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes practical activities and assessments
Learners will take part in demonstrations, group discussions, and realistic simulations using height safety systems and PPE

Practical Activities

Conducting a pre-start safety inspection of height safety gear and the worksite
Setting up and using fall-prevention and arrest systems
Performing safe ascent and descent techniques
Applying a Safe Work Method Statement (SWMS) to a practical scenario
Responding to simulated fall incidents and emergency procedures

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as a SWMS, Take 5, and equipment inspection checklists
Practical demonstration of correct harness use, anchor point setup, implementation of risk control measures, and safe ascent/descent with 100% hook-up

Book Now

Entry Requirements

To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

You will be required to submit current evidence (within the last 3 years) of a Working Safely at Heights Statement of Attainment (or its equivalent)
Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Read and interpret safety signs, procedures, and manufacturer instructions
Complete documentation such as equipment inspection checklists and SWMS
Follow verbal and written instructions from the trainer
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Be physically fit and capable of wearing a harness and performing basic physical movements to ascend and descend ladders and work at heights.

Got Any Questions?

If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Work Safely at Heights
2026-08-31 07:30 - 15:30, 2026-08-27 07:30 - 15:30, 2026-08-21 07:30 - 15:30
Work Safely at Heights
WSH

- RIIWHS204E Work safely at heights

Upcoming Training
There are currently no openings available for this course.

Work Safely at Heights

Working at heights is one of the leading causes of workplace injuries in Australia. This nationally accredited course gives you the hands-on skills and knowledge to identify risks, use fall protection equipment correctly, and follow safe systems of work when operating at any height where there’s a risk of falling.

Through a combination of practical exercises and engaging demonstrations, you’ll learn how to inspect equipment, secure work areas, and perform tasks safely — protecting yourself and your team.

Accredited Unit of Competency

On successful completion, you will receive a Statement of Attainment for:

RIIWHS204E Work safely at heights

Prerequisites

Nil

Book Now

What You'll Learn

Upon successful completion of this course, you will be able to:

Confidently and safely work at heights
Identify potential height-related hazards and assess risk controls
Inspect, fit, and use fall-arrest and restraint systems correctly
Select and maintain harnesses, anchor points, and lifelines
Understand the hierarchy of control when working at heights
Follow safe work procedures and emergency protocols
Comply with WHS legislation, Codes of Practice, and workplace policies

Who Is This Course For?

This course is ideal for anyone working at heights, including:

Construction and maintenance workers
Roofers, electricians, painters, riggers, and scaffolders
Civil, mining, and telecommunications personnel
Supervisors or safety officers responsible for overseeing work at height
Contractors who need to meet workplace safety compliance requirements

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes practical activities and assessments
Learners will take part in demonstrations, group discussions, and realistic simulations using height safety systems and PPE

Practical Activities Include

Conducting a pre-start safety inspection of height safety gear and the worksite
Setting up and using fall-prevention and arrest systems
Performing safe ascent and descent techniques
Applying a Safe Work Method Statement (SWMS) to a practical scenario
Responding to simulated fall incidents and emergency procedures

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as a SWMS, Take 5, and equipment inspection checklists
Practical demonstration of correct harness use, anchor point setup, implementation of risk control measures, and safe ascent/descent with 100% hook-up

Book Now

Entry Requirements

To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Read and interpret safety signs, procedures, and manufacturer instructions
Complete documentation such as equipment inspection checklists and SWMS
Follow verbal and written instructions from the trainer
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Wearing a safety harness
Performing basic physical movements such as ascending and descending ladders
Working safely at heights

Got Any Questions?

If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Provide First Aid incl. CPR
2026-08-31 07:30 - 15:30, 2026-08-28 07:30 - 15:30
Provide First Aid incl. CPR
FACPR

- HLTAID009 Provide cardiopulmonary resuscitation
- HLTAID011 Provide First Aid
Upcoming Training
There are currently no openings available for this course.

Provide First Aid incl. CPR

This nationally accredited training combines HLTAID009 Provide cardiopulmonary resuscitation and HLTAID011 Provide First Aid, giving you the skills and confidence to respond effectively to life-threatening situations and a range of first aid techniques for common injuries and illnesses such as bleeding, shock, fractures, burns, asthma, anaphylaxis, seizures, and more. It is suitable for workplace compliance and for anyone wanting to be prepared to manage medical emergencies confidently and competently.

Accredited Units of Competency

On successful completion, you will receive a Statement of Attainment for:

HLTAID009 Provide cardiopulmonary resuscitation
HLTAID011 Provide First Aid

Prerequisites

Nil
Note: You must have the physical ability to perform at least two minutes of uninterrupted CPR on a manikin placed on the floor

Book Now

What You'll Learn

Recognise and respond to an unresponsive casualty
Perform CPR on adults, children, and infants following ARC guidelines
Use an AED to deliver a shock safely and effectively
Maintain continuous CPR while working with others in an emergency situation
Communicate effectively with emergency services and bystanders
Provide a first aid response to a wide range of medical conditions, injuries, and emergencies including bleeding, shock, fractures, burns, asthma, anaphylaxis, seizures, and more
Complete incident reports and workplace documentation after an emergency

Who Is This Course For?

Workplace first aiders or safety officers
Employees in industries where first aid and CPR are required by law or employer policy
Parents, carers, and community members wanting the skills to respond to emergencies
Anyone needing to maintain first aid and CPR currency for industry compliance (annual CPR refresher recommended, First Aid refresher every three years)

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes practical activities and assessments
Learn through interactive presentations, trainer demonstrations, and realistic hands-on practice with manikins, AED, and first aid equipment

Practical Activities Include

Performing CPR on adult, child, and infant manikins
Operating an AED
Managing an unresponsive casualty, including placing them in the recovery position
Treating injuries such as minor bleeding, nose-bleeds, burns, fractures/sprains/strains, and envenomation
Recognising and responding to asthma, anaphylaxis, choking, and other medical emergencies
Coordinating with others during an emergency scenario
Completing workplace documentation such as incident reports

Assessment

Knowledge assessment (multiple choice theory questions)
Practical assessments to demonstrate CPR, AED use, and first aid management in line with ARC guidelines and first aid standards
An incident report

Book Now

Entry Requirements

To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Proof of identity must be supplied by you on the day of training
You must be at least 14 years of age to participate in the training
Students under 18 years of age must supply parental consent (unless you are linked to an employer)
You need a Unique Student Identifier (USI). If you do not have one, you can apply for it for free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and follow simple written instructions and safety procedures (basic reading and writing at Year 10 level)
Complete basic written reports
Follow verbal instructions from your trainer
Use a digital device (tablet/smartphone/laptop) for assessments

Physical Requirements

Be physically able to perform CPR on the floor for at least two minutes
Be able to kneel, bend, and perform compressions and breaths effectively
Be able to assist casualties safely and confidently
Use rescue equipment without assistance

Got Any Questions?

If you’d like to know more about this course, entry requirements, booking options, or if you feel that you may need support in class…our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Confined Space Entry
2026-08-28 07:30 - 15:30
Confined Space Entry
CSE

- RIIWHS202E Enter and work in confined spaces
- RIIRIS201E Conduct local risk control
- MSMPER200 Work in accordance with an issued permit
- MSMWHS201 Conduct hazard analysis

Upcoming Training
There are currently no openings available for this course.

Confined Space Entry Training

This nationally recognised course will equip you with the skills and knowledge to safely enter, work in, and exit confined spaces while controlling hazards, following permits, and complying with WHS legislation. Through hands-on training, you will complete realistic entry scenarios using gas detectors, permits, harnesses, retrieval systems, and emergency procedures. This course is essential for anyone required to work in or around confined spaces.

Accredited Units of Competency

On successful completion your will receive a Statement of Attainment or the following nationally recognised units:

RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMWHS201 Conduct hazard analysis
MSMPER200 Work in accordance with an issued permit

Prerequisites

Nil

Book Now

What You’ll Learn

Upon successful completion of this course, you will be able to:

Identify confined space hazards, assess risks and apply control measures
Conduct risk assessments and hazard analysis using workplace documentation (SWMS, Take 5, Risk Matrix)
Follow entry permits, sign-on procedures, and communicate with a standby person
Monitor atmospheres using gas detection equipment
Safely enter confined spaces
Use PPE, harnesses, retrieval systems, signs, and barricades correctly
Follow emergency procedures in the event of changing conditions or incidents

Who Is This Course For?

This course is ideal for:

Tradespeople, maintenance workers, contractors and labourers
Workers in construction, mining, utilities, manufacturing, councils and shutdown operations
Standby personnel and those supervising confined space work
Anyone required to enter and work in confined spaces

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes theory, practical activities and assessments
Learn through interactive presentations, trainer demonstrations, and realistic hands-on practical activities in simulated confined spaces

Practical Activities

Conducting a pre-start briefing and risk assessment (SWMS / Take 5)
Inspecting and wearing PPE including full-body harness and respirators
Completing and signing onto a Confined Space Entry Permit
Setting up signage, barricades, and isolation controls
Practical demonstration of two confined space entry simulated scenarios
Gas testing for oxygen levels, LEL, carbon monoxide and hydrogen sulphide
Communicating with the standby person and responding to changes in atmospheric conditions
Simulated evacuation procedures

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as a Take 5s, Risk Assessments, sign off on Confined Space Entry Permits, Entry and Exit Registers, Bump Tests, Harness Inspection Checklists and an End of Day Report

Book Now

Entry Requirements

To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Read and interpret permits, risk assessments and safety signs
Complete written documentation such as Take 5s, basic checklists and reports
Follow verbal and written instructions from the trainer/standby personnel
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Be physically able to enter and move in a confined space
Climb ladders and maintain 3-points-of-contact
Wear a full-body harness, including being suspended if required
Perform basic manual handling

Got Any Questions?

If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Licence to Operate a Forklift Truck
2026-08-26 07:30 - 15:30, 2026-08-25 07:30 - 15:30, 2026-08-24 07:30 - 15:30
Licence to Operate a Forklift Truck
FORK

Licence to Operate a Forklift Truck
Upcoming Training

Course Start Date
Time
Location
Spaces
Cost
Book Now

Employer Booking Form

07/09/2026
07:30 am - 03:30 pm
NEWCASTLE
8
$540.00
Enrol

Book

Licence to Operate a Forklift Truck
Operating a forklift is a high-risk activity that requires the right skills, knowledge, and licence to perform safely. This nationally recognised course gives you the practical experience and confidence to safely operate a forklift in a range of workplace environments.

Delivered over three days (including SafeWork Assessment), this course combines hands-on training, and real-world scenarios to prepare you for your High-Risk Work Licence. You’ll learn how to identify hazards, calculate loads, operate safely, and follow workplace procedures — ensuring you can protect yourself, your team, and your workplace.

Accredited Unit of Competency

On successful completion, you will receive a Statement of Attainment for:

TLILIC0003 Licence to operate a forklift truck

Prerequisites

Nil

Licencing

This course leads to a SafeWork NSW High Risk Work Licence (LF class)
You must be 18 years or older and provide valid ID to be assessed
Formal assessment is conducted by a SafeWork NSW accredited assessor
A fee will apply to obtain your licence from SafeWork NSW upon successful completion

Book Now

What You’ll Learn
Upon successful completion of this course, you will be able to:

Plan and prepare for forklift operations safely
Conduct pre-start and operational checks, including logbooks and equipment inspections
Identify hazards and apply effective risk controls (Take 5, traffic management, exclusion zones)
Interpret data plates, load charts and rated capacity
Calculate load weights and assess whether loads can be safely lifted
Safely pick up, move, stack and place loads
Operate a forklift in a range of conditions
Communicate effectively using hand signals, radios and workplace procedures
Park, shut down and isolate the forklift correctly
Follow WHS legislation, Codes of Practice and workplace procedures

Who Is This Course For
This course is ideal for:

Workers required to operate a forklift as part of their job
Individuals seeking to enter warehousing, construction, logistics or industrial roles
Employers wanting to upskill staff for safe plant operation
Anyone needing a High-Risk Work Licence (LF class)

Book Now

How the Training Works
Training Delivery

Training is delivered in person by a qualified trainer at one of Maxwell Training’s facilities, or at your site pending a suitability inspection
Maximum class size: 8 participants
Duration: 3 days (7.5 hours per day)
Includes classroom learning, workshop activities and practical driving
Final assessment (Day 3) is conducted by a SafeWork NSW accredited HRW assessor

Practical Activities
You will take part in realistic, hands-on activities including:

Completing pre-start and post-start inspections
Using forklift logbooks and reporting faults
Conducting Take 5 risk assessments
Calculating load weights and interpreting data plates
Operating a forklift with dynamic (water drums) and non-dynamic loads (pallets)
Driving through obstacle courses including S-bends, reversing and tight spaces
Lifting, stacking and placing loads at different heights
Applying traffic management and exclusion zones

Assessment
Your competency will be assessed through:

Knowledge assessment (multiple choice and short answer)
Portfolio of Evidence
Practical observation assessments (driving, lifting, hazard control)
SafeWork NSW HRW assessment (theory practical)

Book Now

Entry Requirements
To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Must be 18 years or older
Proof of identity must be supplied and verified on the day of training and assessment
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Licencing Process (SafeWork NSW)
To complete your licence assessment, you must:

APPLY ONLINE for an Assessment Enrolment Number (AEN)
Complete your digital ID check (2 FORMS OF ID REQUIRED)
Receive your AEN via email
Provide your AEN to your assessor before your assessment
Your results will be emailed to you after completion
A $92 licence fee will be required by SafeWork upon successful completion of the HRW assessment

Language, Literacy, Numeracy & Digital (LLND)
You will need basic skills to:

Read and complete knowledge questions (basic Year 10 level literacy)
Read and interpret safety procedures, signage and data plates
Complete logbooks, Take 5 forms and assessments
Perform basic calculations (load weights and capacities)
Follow verbal and written instructions from the trainer
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements
To safely participate, you must be able to:

Climb on and off the forklift using three points of contact
Operate controls while maintaining balance and awareness
Conduct inspections (bending, reaching, visual checks)
Safely handle loads and operate the forklift
Maintain alertness and coordination during operation

Got Any Questions?
If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Confined Space Rescue
2026-08-26 07:30 - 15:30, 2026-08-25 07:30 - 15:30, 2026-08-24 07:30 - 15:30
Confined Space Rescue
CSRES

- RIIWHS202E Enter and work in confined spaces
- RIIRIS201E Conduct local risk control
- MSMPER200 Work in accordance with an issued permit
- MSMWHS201 Conduct hazard analysis
- MSMPER300 Issue work permits
- MSMPER202 Observe permit work
- MSMWHS217 Gas test atmospheres
- MSMWHS216 Operate breathing apparatus
- PUASAR025 Undertake confined space rescue
- HLTAID009 Provide cardiopulmonary resuscitation

(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits and is included in the delivery of this course)
Upcoming Training
There are currently no openings available for this course.

Confined Space Rescue Training

This nationally recognised 3-day course will equip you with the skills and knowledge to enter and work in confined spaces, monitor permits, test atmospheres, use breathing apparatus, and perform confined space rescue operations. Delivered through realistic rescue simulations in purpose built confined space training facilities, this course is ideal for anyone required to act as a rescuer, standby person, permit issuer, or emergency response team member. No previous experience is required — all prerequisite units (e.g. hazard analysis and permit work) are delivered within the course.

Accredited Units of Competency

On successful completion, you will receive a Statement of Attainment for the following nationally recognised units:

RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMWHS201 Conduct hazard analysis
MSMPER202 Observe permit work
MSMPER300 Issue work permits*
MSMWHS217 Gas test atmospheres
MSMWHS216 Operate breathing apparatus
PUASAR025 Undertake confined space rescue
HLTAID009 Provide cardiopulmonary resuscitation

Prerequisites

MSMWHS201 Conduct hazard analysis is a prerequisite unit for MSMPER300 Issue work permits and is included in the delivery of this course.

Book Now

What You’ll Learn

Upon successful completion of this course, you will be able to:

Identify and control confined space hazards using risk assessments and permits
Test and monitor atmospheres for oxygen levels, flammable gases and toxic contaminants
Use breathing apparatus (SCBA) safely in hazardous or irrespirable atmospheres
Issue, observe and close permit-to-work documentation correctly
Perform two confined space entries using harnesses and retrieval systems
Plan and execute confined space rescue procedures safely using tripods, davit arms, recovery winches and stretchers
Communicate effectively with others
Provide CPR and immediate first aid in a confined space incident

Who Is This Course For?

This course is ideal for:

Emergency Response Teams and Confined Space Rescue Personnel
Standby workers looking to upskill to rescue level
Shutdown, mining, utility, water, council, manufacturing and defence workers
Employers who need compliant rescue-trained personnel on site

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes practical activities and assessments
Learners will take part in demonstrations, group discussions, and realistic simulations in confined spaces

Practical Activities

Monitoring workers in a confined space via visual checks, signals and verbal communication
Completing the Confined Space Entry Permit, hazard analysis, and risk control documentation
Gas testing and atmospheric monitoring using calibrated detectors
Gas testing and ventilation of a confined space
Completing risk assessments, entry permits, and rescue plans
Donning, operating and monitoring breathing apparatus (BA)
Using harnesses, tripods, davit arms and retrieval systems
Performing rescue of a conscious and unconscious casualty
Extraction using basket stretcher and mechanical advantage systems
Post-rescue decontamination and incident reporting

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as a Confined Space Entry Permit, rescue plans, risk assessments and gas detector and breathing apparatus inspection checklists, incident report forms
Practical demonstration of selecting and issuing correct permits, monitoring confined space entry and ensuring compliance, gas testing and interpreting results, inspecting and donning breathing apparatus, suspending work or initiating rescue operations

Book Now

Entry Requirements

To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Read and understand permits, gas test results, safety signs and SWMS
Complete written reports such as permits, handover forms, risk assessments, incident report forms
Communicate clearly with entrants and supervisors
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Ability to remain stationed at an entry point for extended periods
Able to wear PPE such as harness and helmet
Perform manual handling tasks (lifting stretchers, equipment)
Communicate clearly with entrants and supervisors
Working in simulated low-visibility, noisy and stressful rescue scenarios

Got Any Questions?

If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

CPR
2026-08-26 07:30 - 11:30
CPR
CPR

- HLTAID009 Provide cardiopulmonary resuscitation
Upcoming Training
There are currently no openings available for this course.

Provide Cardiopulmonary Resuscitation (CPR)

HLTAID009 Provide cardiopulmonary resuscitation is a nationally recognised unit of competency that provides you with the critical knowledge and hands-on skills to respond to breathing and cardiac emergencies in the workplace, community, or at home. This course focuses on teaching you how to identify life-threatening situations quickly and use CPR techniques to sustain life until professional medical help arrives.

Accredited Units of Competency

On successful completion, you will receive a Statement of Attainment for:

HLTAID009 Provide cardiopulmonary resuscitation

Prerequisites

Nil
Note: You must have the physical ability to perform at least two minutes of uninterrupted CPR on a manikin placed on the floor

Book Now

What You'll Learn

Recognise and respond to an unresponsive casualty
Perform CPR on adults, children, and infants following ARC guidelines
Use an AED to deliver a shock safely and effectively
Maintain continuous CPR while working with others in an emergency situation
Communicate effectively with emergency services and bystanders
Complete incident reports and workplace documentation after an emergency
Understand the importance of ongoing refresher training to keep your skills current

Who Is This Course For?

Workplace first aiders or safety officers
Work in industries where CPR training is required by law or employer policy
Anyone wanting the skills to respond to emergencies at work, home, or in the community
Employees needing to maintain currency for industry compliance (annual refresher recommended)

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes practical activities and assessments
Learn through interactive presentations, trainer demonstrations, and realistic hands-on practice with manikins, AED, and first aid equipment

Practical Activities Include

Performing CPR on adult, child, and infant manikins
Operating an AED
Managing an unresponsive casualty, including placing them in the recovery position
Coordinating with others during an emergency scenario

Assessment

Knowledge assessment (multiple choice theory questions)
A practical assessment to demonstrate CPR and AED use to the standard set by ARC guidelines

Book Now

Entry Requirements

To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Proof of identity must be supplied by you on the day of training
You must be at least 14 years of age to participate in the training
Students under 18 years of age must supply parental consent (unless you are linked to an employer)
You need a Unique Student Identifier (USI). If you do not have one, you can apply for it for free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and follow simple written instructions and safety procedures (basic reading and writing at Year 10 level)
Follow verbal instructions from your trainer
Use a digital device (tablet/smartphone/laptop) for assessments

Physical Requirements

Be physically able to perform CPR on the floor for at least two minutes
Be able to kneel, bend, and perform compressions and breaths effectively
Be physically able to move quickly and safely to perform a rescue
Use rescue equipment without assistance

Got Any Questions?

If you’d like to know more about this course, entry requirements, booking options, or if you feel that you may need support in class…our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Confined Space Standby
2026-08-25 07:30 - 15:30, 2026-08-24 07:30 - 15:30
Confined Space Standby
CSS

- RIIWHS202E Enter and work in confined spaces
- RIIRIS201E Conduct local risk control
- MSMPER200 Work in accordance with an issued permit
- MSMWHS201 Conduct hazard analysis
- MSMPER300 Issue work permits
- MSMPER202 Observe permit work
- MSMWHS217 Gas test atmospheres

(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits and is included in the delivery of this course)
Upcoming Training
There are currently no openings available for this course.

Confined Space Standby Training

This course is designed to equip you with the essential skills and knowledge required to safely observe permit-controlled work and conduct atmospheric testing using electronic gas detection equipment. Whether you're acting as a safety observer or performing gas tests prior to work commencement, understanding and managing potential hazards is crucial for maintaining a safe work environment.

Accredited Units of Competency

On successful completion, you will receive a Statement of Attainment for the following nationally recognised units:

RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMWHS201 Conduct hazard analysis
MSMPER202 Observe permit work
MSMPER300 Issue work permits*
MSMWHS217 Gas test atmospheres

Prerequisites

MSMWHS201 Conduct hazard analysis is a prerequisite unit for MSMPER300 Issue work permits and is included in the delivery of this course

Book Now

What You’ll Learn

Upon successful completion of this course, you will be able to:

Perform two confined space entries using harnesses and retrieval systems
Understand the legal responsibilities of a Standby Person in confined space operations
Interpret and monitor confined space permits and ensure all controls are in place
Maintain continuous communication with entrants
Observe work activities to ensure compliance with permit conditions and SWMS
Identify and respond to changing hazards, unsafe behaviours, or permit breaches
Carry out gas testing, interpret readings, and report unsafe atmospheric levels
Initiate emergency response procedures in accordance with the Rescue Plan
Accurately complete permit close-out and end-of-day handover documentation

Who Is This Course For?

This course is ideal for:

Workers acting as Standby Personnel / Safety Observer for confined space tasks
Supervisors and permit issuers
Workers in construction, utilities, councils, industrial maintenance, shutdowns and civil work
Employers who need to comply with WHS Regulations & AS/NZS 2865 Confined Spaces

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes practical activities and assessments
Learners will take part in demonstrations, group discussions, and realistic simulations in confined spaces

Practical Activities

Checking permits and confirming isolations, signage and rescue plans are in place
Monitoring workers in a confined space via visual checks, signals and verbal communication
Completing the Confined Space Entry Permit, hazard analysis, and risk control documentation
Gas testing and atmospheric monitoring using calibrated detectors
Responding to hazards or unsafe conditions — suspending the permit if required
Initiating emergency call procedures when a rescue is required
Completing end-of-shift handover and permit close-out reports

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as a Confined Space Entry Permit, risk assessments and gas detector inspection checklists
Practical demonstration of selecting and issuing correct permits, monitoring confined space entry and ensuring compliance, gas testing and interpreting results, suspending work or initiating emergency response if conditions change

Book Now

Entry Requirements

To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Read and understand permits, gas test results, safety signs and SWMS
Complete written reports such as permits, handover forms, risk assessments
Communicate clearly with entrants and supervisors
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Ability to remain stationed at an entry point for extended periods
Able to wear PPE such as harness and helmet
Communicate clearly with entrants and supervisors
Capable of initiating emergency procedures and assisting rescue teams

Got Any Questions?

If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Work Safely Near LEA For Non Electrical Worker
2026-08-25 07:30 - 11:30
Work Safely Near Electric Lines (for Non-Electrical Workers)
EL

- UETDREL006 Working safely in the vicinity of live electrical apparatus as a non-electrical worker
Upcoming Training
There are currently no openings available for this course.

Work Safely Near Electric Lines (for Non-Electrical Workers)

Electric lines don’t have to be touched to kill. Every year in Australia, workers are seriously injured — or worse — simply because plant, tools or people moved too close to live electrical infrastructure. Whether you’re operating machinery, spotting for others, climbing, excavating or even unloading on-site, knowing how to identify electrical hazards and maintain safe distances can be the difference between life and death.

This course is designed to give you the confidence and knowledge to work safely around electric lines as a non-electrical worker. You’ll learn how electricity behaves, how to recognise danger zones, how to use Safey Observers and permits correctly, and exactly what to do in an emergency — including how to survive if machinery makes contact with live wires.

Through real-world scenarios and practical training, you’ll walk away knowing how to protect yourself, your team and the public while staying compliant with WHS laws and workplace requirements.

Accredited Unit of Competency

On successful completion, you will receive a Statement of Attainment for the following nationally recognised unit:

UETDREL006 Work safely in the vicinity of live electrical apparatus as a non-electrical worker

Prerequisites

Nil

Book Now

What You’ll Learn

Upon successful completion of this course, you will be able to:

Explain legal requirements for working near electric lines
Identify overhead and underground electrical infrastructure
Identify hazards and assess workplace risks
Determine and maintain Safe Approach Distances (SAD)
Apply safe work practices and workplace procedures
Implement controls for common work activities
Respond to electrical emergencies and complete documentation

Who Is This Course For?

This course is ideal for non-electrical workers who carry out tasks near electric lines or services, including:

Plant and machinery operators (excavators, cranes, EWPs, trucks)
Construction, civil, road and rail workers
Tree workers, landscapers, council staff and maintenance crews
Safety Observers / Spotters working near electrical hazards
Supervisors, site managers, contractors and apprentices who need electrical awareness

Book Now

How the Training Works

Training Delivery

Delivered in person by a qualified trainer at one of Maxwell Training’s purpose-built simulators or an approved training facility
The total course duration includes practical activities and assessments
Learners will take part in demonstrations, group discussions, and realistic simulated work scenarios

Practical Activities

Identifying electrical assets and voltage types (LV and HV)
Assessing Safe Approach Distances for people, vehicles and plant
Completing workplace documentation such as risk assessments, PPE inspections, incident report forms and demonstrating your understanding of permits
Working with Spotters and using agreed communication methods (hand signals, radios)
Simulated emergency responses including contact with electric lines

Assessment

Knowledge assessment (multiple choice and short answer)
Completion of a Portfolio of Evidence including workplace documents such as PPE inspection checklist, risk assessments, permits, incident reporting documents
Practical demonstration of safe work techniques near live electrical apparatus

Book Now

Entry Requirements

To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Proof of identity must be supplied and verified on the day of training
Minimum age of 14 years
Students under 18 years must provide parental consent (unless linked to an employer)
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)

Read and complete knowledge questions (basic Year 10 level literacy)
Read and interpret permits, SWMS, risk assessments, permits and electrical safety signage
Complete written assessments, risk forms, PPE checklists and incident reports
Communicate clearly with Safety Observers, plant operators and supervisors
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements

Ability to stand, observe, and maintain exclusion zones for periods of time
Able to wear PPE such as hi-vis, hard hat, gloves and safety footwear
Capable of working around mobile plant, uneven terrain and outdoor environments

Got Any Questions?

If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire

Elevating Work Platform Training - Scissor Lift
2026-08-20 07:30 - 15:30
Elevating Work Platform Training - Scissor Lift
EWP1

Elevating Work Platform Training - Scissor Lift
Upcoming Training
There are currently no openings available for this course.

Elevating Work Platform Training - Scissor Lift
Operating an elevating work platform (EWP) under 11 metres or a scissor lift still presents real workplace risks and requires the right skills to perform safely. This nationally recognised course gives you the practical knowledge and hands-on experience to operate EWPs safely in a range of workplace environments.

Delivered in a one-day, practical format, this course focuses on safe operation, hazard awareness, and correct use of equipment — helping you build confidence and capability at work.

Important: This course DOES NOT provide a High-Risk Work Licence (HRWL). It is designed for workplace competency and compliance. If you require a licence for boom-type EWPs over 11 metres, please refer to our Licence to Operate a Boom-Type Elevating Work Platform (11 metres or more) course.

Accredited Unit of Competency
On successful completion, you will receive a Statement of Attainment for:

RIIHAN301E Operate elevating work platform

Prerequisites

Nil

Book Now

What You’ll Learn
Upon successful completion of this course, you will be able to:

Plan and prepare for EWP operations safely
Plan and prepare for EWP operations safely
Conduct pre-start and post-start inspections, including logbooks and safety checks
Identify hazards and apply effective risk controls (Take 5, exclusion zones, traffic management)
Interpret load charts and Safe Working Load (SWL)
Perform basic calculations to confirm loads are within limits
Safely set up and operate an EWP or scissor lift
Use fall protection equipment, including harnesses and anchor points
Work safely around powerlines, structures, and other workers
Communicate effectively using hand signals and radios
Shut down, secure and report faults correctly

Who Is This Course For
This course is ideal for:

Workers required to operate EWPs under 11 metres or scissor lifts
Tradespeople, warehouse workers and maintenance personnel
Employers wanting to upskill staff for safe plant operation
Workers needing proof of competency (not a HRWL)

Book Now

How the Training Works
Training Delivery

Training is delivered in person by a qualified trainer at one of Maxwell Training’s facilities, or at your site pending a suitability inspection
Duration: 1 day (7.5 hours)
Includes classroom learning, practical workshop activities and real-world scenarios

Practical Activities
You will take part in realistic, hands-on activities including:

Conducting pre-start inspections and logbook checks
Completing Take 5 risk assessments
Performing load chart interpretation and calculations
Carrying out harness inspections
Setting up safe work areas with barriers and exclusion zones
Operating an EWP and scissor lift
Managing hazards such as ground conditions, weather, and nearby workers

Assessment
Your competency will be assessed through:

Knowledge assessment (multiple choice and short answer)
Portfolio of Evidence
Practical observation assessments

Book Now

Entry Requirements
To fully participate and stay safe during practical activities, you must meet the following requirements:

General Requirements

Must be 18 years or older
Proof of identity must be supplied and verified on the day of training and assessment
You need a Unique Student Identifier (USI) — apply free at www.usi.gov.au

Language, Literacy, Numeracy & Digital (LLND)
You will need basic skills to:

Read and complete knowledge questions (basic Year 10 level literacy)
Read and interpret safety procedures, signage and load charts
Complete logbooks, Take 5 forms and assessments
Perform basic calculations (platform load and SWL)
Follow verbal and written instructions from the trainer
Use a digital device (tablet, smartphone, or laptop) for assessments

Physical Requirements
To safely participate, you must be able to:

Climb on and off the EWP using three points of contact
Work safely at height for short periods
Wear and use a safety harness and PPE
Operate controls while maintaining balance and awareness
Maintain alertness and coordination during operation

Got Any Questions?
If you’d like to know more about this course, entry requirements, or booking options — or if you feel that you may need support in class — our team is here to help!

Call us on 1300 MAXWEL or email bookings@maxwellrt.com.au and we’ll make sure you have all the information you need.

Enquire
