Nationally Recognised Training
.
Heights Training
Work Safely at Heights (1 day)
Unit of Competency
RIIWHS204E Work safely at heights
Work Safely at Heights Refresher (½ day)
Unit of Competency
RIIWHS204E Work safely at heights
Note: This course is for students who've completed Work Safely at Heights within the last 3 years.
.
Confined Space Training
Confined Space Entry (1 day)
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMWHS201 Conduct hazard analysis
Confined Space Standby (2 days)
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMPER300 Issue work permits
MSMPER202 Observe permit work
MSMWHS217 Gas test atmospheres
MSMWHS201 Conduct hazard analysis
(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits)
Confined Space Rescue (3 days)
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
PUASAR025 Undertake confined space rescue
HLTAID009 Provide cardiopulmonary resuscitation
MSMPER200 Work in accordance with an issued permit
MSMPER300 Issue work permits
MSMPER202 Observe permit work
MSMWHS217 Gas test atmospheres
MSMWHS216 Operate breathing apparatus
MSMWHS201 Conduct hazard analysis
(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits)
Confined Space Standby – Refresher (1 Day)
Note: Note: This course is designed ONLY for experienced personnel employed in operational roles entering and working in confined spaces including acting as a Standby and working with Permit Controls Systems.
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMPER300 Issue work permits
MSMPER202 Observe permit work
MSMWHS217 Gas test atmospheres
MSMWHS201 Conduct hazard analysis
(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits)
Confined Space Rescue – Refresher (1 Day)
Note: This course is ONLY for students holding current Confined Space competencies who participate in regular rescue and emergency drills for confined space emergencies at work using a range of rescue equipment, including gas test monitoring and breathing apparatus.
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
PUASAR025 Undertake confined space rescue
MSMPER200 Work in accordance with an issued permit
MSMPER300 Issue work permits
MSMPER202 Observe permit work
MSMWHS217 Gas test atmospheres
MSMWHS216 Operate breathing apparatus
MSMWHS201 Conduct hazard analysis
(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits)
.
CPR, First Aid & Rescue
CPR (½ day)
Unit of Competency
HLTAID009 Provide cardiopulmonary resuscitation
Provide First Aid incl. CPR (1 day)
Units of Competency
HLTAID009 Provide cardiopulmonary resuscitation
HLTAID011 Provide first aid
Low Volt Rescue CPR (½ day)
Units of Competency
UETDRRF004 Provide rescue from a live Low Voltage Panel
HLTAID009 Provide cardiopulmonary resuscitation
(Note: HLTAID009 Provide cardiopulmonary resuscitation is a pre-requisite)
.
Safety / Other
Fire Warden & Extinguisher (1 day)
Units of Competency
PUAFER005 Operate as part of an emergency control organisation
(Note: PUAFER005 Operate as part of an emergency control organisation is a prerequisite to PUAFER006 Lead an emergency control organisation)
PUAFER006 Lead an emergency control organisation
PUAFER008 Confine small emergencies in a facility
First Attack Firefighting Equipment (½ day)
Units of Competency
CPPFES2005 - Demonstrate first attack firefighting equipment
Gas Test Atmospheres (½ day)
Unit of Competency
MSMWHS217 Gas test atmospheres
Safe Work Near Powerlines – Non Electrical Worker (½ day)
Unit of Competency
UETDRREL006 Work safely in the vicinity of live electrical apparatus as a non-electrical worker
Non-Accredited Training
TRG – Hot work (Cutting and Welding) at Mines and Petroleum Sites (Formerly MDG25 Awareness) Training (1 day)
Description
This course has been approved by Glencore and Bulga Coal.
About Our Training
Maxwell Training Pty Ltd t/as Maxwell Recruitment & Training (RTO 41350) delivers nationally recognised training.
Corporate pricing is available for long-term partnerships. Per-person pricing is for training at our facility using our custom-built, real-world training simulator. On-site training is also available, as detailed further below. All prices are in AUD, and listed training times are for the face-to-face components of each course.
.
“Really appreciate the quality of course delivery. Great Morning.”
– Matthew S, Student
.
“One of the best trainers I’ve encountered & I’ve encountered plenty.”
– Pat, Student
.
“Always a pleasure to attend a training course at Maxwell ”
– Jimilai L, Student
Our Facility
Our state-of-the-art training facility features our custom-engineered training simulator, which closely simulates the work environment.
Our training can be conducted at our facility or on-site. On-site training can be completed as long as there is an area in which the practical component can be completed safely. Our trainers can attend site to assess if there is a suitable area. Other conditions may apply.
