Nationally Recognised Training
Newcastle facility: 14 Callistemon Close, Warabrook NSW 2304
Sydney facility: 13 South Street, Rydalmere NSW 2116
.
Heights Training
Work Safely at Heights (1 day)
Unit of Competency
RIIWHS204E Work safely at heights
Work Safely at Heights Refresher (½ day)
Unit of Competency
RIIWHS204E Work safely at heights
Newcastle Course Details & Bookings →
Sydney Course Details & Bookings →
Note: This course is for students who've completed Work Safely at Heights within the last 3yrs.
.
Confined Space Training
Confined Space Entry (1 day)
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMWHS201 Conduct hazard analysis
Confined Space Standby (2 days)
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMPER300 Issue work permits
MSMPER202 Observe permit work
MSMWHS217 Gas test atmospheres
MSMWHS201 Conduct hazard analysis
(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits)
Confined Space Rescue (3 days)
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
PUASAR025 Undertake confined space rescue
HLTAID009 Provide cardiopulmonary resuscitation
MSMPER200 Work in accordance with an issued permit
MSMPER300 Issue work permits
MSMPER202 Observe permit work
MSMWHS217 Gas test atmospheres
MSMWHS216 Operate breathing apparatus
MSMWHS201 Conduct hazard analysis
(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits)
Confined Space Standby – Refresher (1 Day)
Note: Note: This course is designed ONLY for experienced personnel employed in operational roles entering and working in confined spaces including acting as a Standby and working with Permit Controls Systems.
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
MSMPER200 Work in accordance with an issued permit
MSMPER300 Issue work permits
MSMPER202 Observe permit work
MSMWHS217 Gas test atmospheres
MSMWHS201 Conduct hazard analysis
(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits)
Confined Space Rescue – Refresher (1 Day)
Note: This course is ONLY for students holding current Confined Space competencies who participate in regular rescue and emergency drills for confined space emergencies at work using a range of rescue equipment, including gas test monitoring and breathing apparatus.
Units of Competency
RIIWHS202E Enter and work in confined spaces
RIIRIS201E Conduct local risk control
PUASAR025 Undertake confined space rescue
MSMPER200 Work in accordance with an issued permit
MSMPER300 Issue work permits
MSMPER202 Observe permit work
MSMWHS217 Gas test atmospheres
MSMWHS216 Operate breathing apparatus
MSMWHS201 Conduct hazard analysis
(Note: MSMWHS201 Conduct hazard analysis is a prerequisite to the unit MMSPER300 Issue work permits)
.
CPR, First Aid & Rescue
CPR (½ day)
Unit of Competency
HLTAID009 Provide cardiopulmonary resuscitation
Provide First Aid incl. CPR (1 day)
Units of Competency
HLTAID009 Provide cardiopulmonary resuscitation
HLTAID011 Provide first aid
Low Volt Rescue CPR (½ day)
Units of Competency
UETDRMP018 Perform rescue from a live low voltage panel
HLTAID009 Provide cardiopulmonary resuscitation
(Note: HLTAID009 Provide cardiopulmonary resuscitation is a pre-requisite)
.
Forklift & Elevated Work Platforms (EWPs)
Licence to Operate a Forklift Truck (3 days)
Units of Competency
TLILIC0003 - Licence to operate a forklift truck
Licence to Operate a Boom-Type Elevating Work Platform (11m+) (3 days)
Units of Competency
TLILIC0005 - Licence to operate a boom-type elevating work platform (boom length 11m+)
Elevating Work Platform Training (Scissor Lift) (1 day)
Units of Competency
RIIHAN301E - Operate elevating work platform
EWP Training (Under 11m, Over 11m & Scissor Lift) (3 days)
Units of Competency
TLILIC0005 - Licence to operate a boom-type elevating work platform (boom length 11m+)
RIIHAN301E - Operate elevating work platform
.
Safety / Other
Chief & Warden Training (Incl. Confine Small Emergencies) (1 day)
Units of Competency
PUAFER005 Operate as part of an emergency control organisation
(Note: PUAFER005 Operate as part of an emergency control organisation is a prerequisite to PUAFER006 Lead an emergency control organisation)
PUAFER006 Lead an emergency control organisation
PUAFER008 Confine small emergencies in a facility
First Attack Firefighting Equipment (½ day)
Units of Competency
CPPFES2005 - Demonstrate first attack firefighting equipment
Gas Test Atmospheres (½ day)
Unit of Competency
MSMWHS217 Gas test atmospheres
Safe Work Near Powerlines – Non Electrical Worker (½ day)
Unit of Competency
UETDREL006 Work safely in the vicinity of live electrical apparatus as a non-electrical worker
Course in Crystalline Silica Exposure Prevention
Units of Competency
NAT10830001 Prevent crystalline silica exposure
Verification of Competency (VOC)
Ensure your workers are competent, compliant, and ready for the job.
Our Verification of Competency (VOC) is a formal assessment process used to confirm that workers can safely perform specific tasks and operate equipment in line with workplace and legislative requirements. This is not a training course – it is an assessment of existing knowledge, skills and experience.
VOC assessments are ideal for employers who need to validate a worker’s capability before they commence work, return to site, or transition into a new role or environment.
What does a VOC involve?
Each VOC is tailored to the task or plant being assessed and typically includes:
- A theory assessment to confirm underpinning knowledge
- A practical assessment to demonstrate safe operation and task competency
- Verification of relevant licences, tickets, or prior experience
Why choose a VOC?
- Confirms workers are competent for site-specific requirements
- Supports WHS compliance and due diligence obligations
- Reduces risk by identifying gaps in knowledge or performance
- Provides documented evidence of competency
If a worker is unable to demonstrate competency, we can recommend suitable training pathways to help them meet the required standard.
Available now for a wide range of plant, equipment and high-risk activities including Forklift, EWP, Excavator, Front End Loader, Telehandler and more.
To discuss your site requirements or to book a VOC assessment, contact out team:
Non-Accredited Training
TRG – Hot work (Cutting and Welding) at Mines and Petroleum Sites (Formerly MDG25 Awareness) Training (1 day)
Description
This course has been approved by Glencore and Bulga Coal.
Manual Handling (½ day)
Description
Perform manual handling tasks.
About Our Training
Maxwell Training Pty Ltd t/as Maxwell Recruitment & Training (RTO 41350) delivers nationally recognised training.
Corporate pricing is available for long-term partnerships. Per-person pricing is for training at our facility using our custom-built, real-world training simulator. On-site training is also available, as detailed further below. All prices are in AUD, and listed training times are for the face-to-face components of each course.
All training for Maxwell clients is backed by our Client Guarantees.
.
“Really appreciate the quality of course delivery. Great Morning.”
– Matthew S, Student
.
“One of the best trainers I’ve encountered & I’ve encountered plenty.”
– Pat, Student
.
“Always a pleasure to attend a training course at Maxwell ”
– Jimilai L, Student
Our Facilities
Our state-of-the-art training facilities in Newcastle and Sydney feature our custom-engineered training simulator, which closely simulates the work environment.
Our training can be conducted at our facilities or on-site. On-site training can be completed as long as there is an area in which the practical component can be completed safely. Our trainers can attend site to assess if there is a suitable area. Other conditions may apply.
Newcastle facility pictured
